Rispondi alla discussione

JavaScript è disabilitato. Per una migliore esperienza di navigazione attivalo nel tuo programma o nella tua app per navigare prima di procedere.

Testo: <blockquote data-quote="sunboy" data-source="post: 4566062" data-attributes="member: 6847">rinnovo l'invito a controllare che il software sia installato bene e che sia fatto hard resetpoi c'è da tener conto di questo:If the Edge has multiple sources for the same information it has an internal priority table to determine which order to use the various sources in. For your set-up Cadence will come from Vector first and then from the GSC-10 Speed will come from the GSC-10 first and then from the GPS data On the Edge 500 when you are pairing the GSC-10 with the Edge you need to select the "Spd/Cad Sensor" option under the sensor details even if you only want to use one of the information channels it is broadcasting. You are really telling the Edge what type of sensor it is looking for rather than specifying where the information is coming from. In this case the GSC-10 is a combined sensor even if you only use one of the channels. The use of "Speed and Cadence" is telling the Edge to look for 2 different sensors, one that identifies itself as a speed sensor and another that identifies itself as cadence sensor. In your case cadence is coming from an ANT+ device that is identified as a power meter. I hope this makes sense. If you want you can remove the cadence magnet. The GSC-10 will then just operate as a speed sensor.<a href="https://forums.garmin.com/showthread.php?68195-vector-speed-sensor-compatability&p=241545#post241545" target="_blank">https://forums.garmin.com/showthread.php?68195-vector-speed-sensor-compatability&p=241545#post241545</a>però se si spulcia bene sul forum le indicazioni erano già state date nella sostanza...</blockquote>

Verifica Anti SPAM

Alto Basso

Cerca

Cerca

Rispondi alla discussione