Cerca
Cerca solo tra i titoli
Da:
Cerca solo tra i titoli
Da:
Menu
Home
Allerta prezzi
Forum
Nuovi Messaggi
Cerca...
Iscritti
Visitatori online
Novità
Nuovi Messaggi
Nuovi media
Nuovi commenti media
Ultime Attività
Nuove inserzioni nel mercatino
Nuovi commenti nel mercatino
Mercatino
Nuove inserzioni
Nuovi commenti
Latest reviews
Cerca nel mercatino
Feedback
Guarda le statistiche
Training Camp
Pianificazione
MTB
Media
Nuovi media
Nuovi commenti
Cerca media
EBIKE
Accedi
Registrati
Cerca
Cerca solo tra i titoli
Da:
Cerca solo tra i titoli
Da:
Nuovi Messaggi
Cerca...
Iscritti
Visitatori online
Menu
Install the app
Installa
Rispondi alla discussione
JavaScript è disabilitato. Per una migliore esperienza di navigazione attivalo nel tuo programma o nella tua app per navigare prima di procedere.
Stai usando un browser molto obsoleto. Puoi incorrere in problemi di visualizzazione di questo e altri siti oltre che in problemi di sicurezza. .
Dovresti aggiornarlo oppure
usarne uno alternativo, moderno e sicuro
.
Home
Forum
Tecnica
Bici e telai
Costruttori
Llewellyn...ditemi un po'
Testo
<blockquote data-quote="Dazza" data-source="post: 2907192" data-attributes="member: 33758"><p>Steel forks, I agree are the best.</p><p></p><p>It could be 110mm or 120mm (I prefer millimeters) depending of the handle bar curve. The sum of these two dimensions may be the same!</p><p></p><p>The stem length has to take into account the shape of the handle bar,</p><p>the distance of the handle bar curvature is variable</p><p>for example</p><p>Deda Newton Shallow (Italian Classic) is 94mm</p><p>Nitto Mod 104 is 79mm</p><p>and every brand and model of handle bar is different.</p><p>I measure the bars to be used and keep the data, example Cinelli 66 is 95mm. Even the tilt of the bars will change the reach dimension.</p><p></p><p>So a 110mm stem with big curve handle bar (Nitto) is going to have longer reach to the curves and brake lever hoods </p><p>than a 120mm stem with Newton shallow bars.</p><p></p><p>I plot where the hand will be in the drop curve and on the lever hoods.</p><p>Then plot the dimension back from the there to the handle bar stem centre. Then the stem length is the dimension to the chosen place of the steering axis.</p><p></p><p>Position first. </p><p>Feet, hands and bum.</p><p>The frame and bike parts go under this.</p></blockquote><p></p>
[QUOTE="Dazza, post: 2907192, member: 33758"] Steel forks, I agree are the best. It could be 110mm or 120mm (I prefer millimeters) depending of the handle bar curve. The sum of these two dimensions may be the same! The stem length has to take into account the shape of the handle bar, the distance of the handle bar curvature is variable for example Deda Newton Shallow (Italian Classic) is 94mm Nitto Mod 104 is 79mm and every brand and model of handle bar is different. I measure the bars to be used and keep the data, example Cinelli 66 is 95mm. Even the tilt of the bars will change the reach dimension. So a 110mm stem with big curve handle bar (Nitto) is going to have longer reach to the curves and brake lever hoods than a 120mm stem with Newton shallow bars. I plot where the hand will be in the drop curve and on the lever hoods. Then plot the dimension back from the there to the handle bar stem centre. Then the stem length is the dimension to the chosen place of the steering axis. Position first. Feet, hands and bum. The frame and bike parts go under this. [/QUOTE]
Riporta citazioni...
Verifica Anti SPAM
Invia risposta
Home
Forum
Tecnica
Bici e telai
Costruttori
Llewellyn...ditemi un po'
Alto
Basso