Scusate la ripetizione, ma quando parlo di chiarezza intendo una risposta del tipo che potete leggere qui:
http://www.thehubsa.co.za/forum/topic/101552-swiftcarbon-bikes-in-sa/
data da VeloSport in merito alle biciclette Swift, ditta accusata dai forumendoli autoctoni di copiare i modelli della Xpace, con particolare riferimento al
telaio 838.
Qui di seguito la risposta:
Posted 22 March 2011 - 04:30
You are correct that we have used shared moulds for some of our 2011 bikes as many other manufacturers (Da Rosa, Johann Museeuw, Colnago, Eddy Merckx) do but from 2012 there will be no shared moulds on any of our bikes.
For now however, the key defining points that differentiate Swift Carbon are as follows :
1) Swift Purchases its own Carbon filament directly from Mitsubishi Rayon and Torayca in Japan – these are the 2 best filament producers in the World . X Pace frames are made of neither , they are standard “ Sports Grade “ Carbon purchased in Taiwan .
2) Swift Purchases its own NanoTech resins from Germany and imports them to China . X Pace frames only use a similar resin on Certain frames , and this is not the German technology we use .
3) Swift has its own engineer at the factory to oversee the Carbon Layup process within the moulds . The layup process is a very key ingredient to getting greater Carbon filament alignment which equates to greater lateral stiffness where it matters most ( BB / Head Tube ) – X Pace do not do this and they work from a generic standard layup drawing .
4) Swift utilizes a special Moulding technology in all its frames that does not use Air bags when we mould the frames . This is a key differentiator as the X Pace frames use airbags for moulding . The difference here is that we can get the walls smoother and stronger and with less de-lamination using this process .
5) We have our own QC in the factory at all point of production , X Pace , nor any other carbon factory don’t do this on their generic frames . This is to guarantee the quality .
6) Swift Carbon HQ is setup in Taiwan to ensure the best build quality and to monitor the build process from start to finish.
You are also welcome to visit our new Cape Town office in Gardens to take a look at the full range of bikes.
This post has been edited by Velo Sports: 22 March 2011 - 04:31